How do I clean my shuttle table system?

Tutorial on correct care and maintenance

Regular care and maintenance is very important in order to ensure optimum functioning of the shuttle table system. In our video tutorial, we will show you step-by-step how to clean your shuttle table system correctly. Ensure a high degree of value retention and optimum condition of your laser system quickly and simply.

Maintenance / inspections to be carried out by the owner - Testing of the laser system: Check the state of the machine before starting up (Register 2 Basic System in the operating instructions).

Caution:

High priority is given to the cleaning of the guide rails, rollers and carriers of the shuttle table. Permanent use under unfavourable ambient conditions can lead to faulty functioning and premature wear. Clean regularly and at timely cleaning intervals. In this way, you will prevent any system breakdowns.

Clean the guide rails

Guide rails:

With the table dismantled:

  • Clean the guide rails with an industrial vacuum cleaner.
  • Wipe over the guide rails/roller tracks and deflection curves.
  • It is better not to use any grease or lubricating oil.

Clean the guide rollers

Guide rollers:

With the table dismantled:

  • It is preferable to clean the guide or damping rollers with a clean, lint-free cloth.
  • They must move smoothly.

Clean the drive pins

Ball bearings:

  • The ball bearings are closed and need no additional maintenance.
  • It is preferable to clean the drive pins.
  • Clean with a clean and lint-free cloth.

Wipe over the surface of the table and the suction channel holes

Surface of the basic table:

With the table dismantled:

  • Wipe over the surface of the table and the suction channel holes.
  • It is preferable to use soapsuds for cleaning, depending on the previous application.

Removing medium to heavy soiling:

Use standard commercial benzine. Special attention must be paid here to adequate aeration and ventilation, because highly flammable gasses could be released.

  • Wipe over the surrounding rubber seals carefully.
  • Use a rubber care product now and then to keep the rubber seals supple.

Do you have any questions? We are pleased to advise you.

 
© 2015 - 2017 eurolaser GmbH. All rights reserved.