The eurolaser modular concept
What configuration options are available for the laser cutters?
The modular design of eurolaser cutting machines allows for configurations that are specially adapted to every requirement. We analyse your needs and configure the laser machine individually for you. You can process a wide range of materials on eurolaser laser machines.
Cut plastics, foams, textiles, adhesive tapes, woods, acrylics, composites and much more. We would be happy to carry out cutting tests with your material in our Application Centre. You will receive a detailed test report and see how your material can be cut and engraved with our laser machines.
Laser machine L-1200
Working area (WxL):
1,800 x 1,230 mm (70.8" x 48.4")
Laser power:
60 to 450 watts
Laser machine L-3200
Working area (WxL):
1,800 x 3,200 mm (70.8" x 125.9")
Laser power:
60 to 650 watts
eurolaser L-Line
Laser cutting machine L-1200
Technical specifications
| Working area (WxL): | 1,800 mm x 1,230 mm (70.8" x 48.4") |
| Dimensions (WxLxH): | 3,200 mm x 2,010 mm x 1,600 mm (125.9" x 79.1" x 62.9") |
| Max. material width: | 2,112 mm (83.1") |
| Material clearance: | 15 - 55 mm (without material carrier) |
| Laser power: | 60 to 450 watts |
| Laser source: | CO2laser |
| Speed: | 1 - 1,414 mm/s (in 1 mm steps) |
| Acceleration: | max. 14.1 m/s² (555"/s²) |
Too small for your application?
You may be interested in the XL-Line models.
L-1200 with Shuttle Table System
The Shuttle Table System allows you to increase the efficiency of your eurolaser machine by minimising downtime. Load and unload the material carriers easily from three sides while the machine continues to operate.
L-1200 with Conveyor System
Automate your processing workflow for roll materials with the Conveyor System. Thanks to the efficient and time-saving material feed, textiles, films and other roll materials are transported directly to the laser processing.
eurolaser L-Line
Laser cutting machine L-3200
Technical specifications
| Working area (WxL): | 1,800 mm x 3,200 mm (70.8" x 125.9") |
| Dimensions (WxLxH): | 3,520 mm x 3,940 mm x 1,600 mm (138.5" x 155.1" x 62.9") |
| Max. material width: | 1,880 mm (74.0") |
| Material clearance: | 58 - 80 mm (without material carrier) |
| Laser power: | 60 to 650 watts |
| Laser source: | CO2 laser |
| Speed: | 1 - 1,414 mm/s (in 1 mm steps) |
| Acceleration: | max. 14.1 m/s² (555"/s²) |
Too small for your application?
You may be interested in the XL-Line models.
L-3200 with Conveyor System
Automate your processing workflow for roll materials with the Conveyor System. Thanks to the efficient and time-saving material feed, textiles, films and other roll materials are transported directly to the laser processing.
