Overview of automations for your laser machine
Save time and money through optimised processes
Increase your productivity by making optimum use of your eurolaser cutting machine. Automated production simplifies your work processes and speeds up the processing of large quantities – for greater efficiency and higher returns.
The various automation solutions for material feeding and removal are flexibly tailored to your requirements and take into account your specific application, the material to be processed and the individual process environment.
Ideal for roll goods
Conveyor System
Automate your machining process for roll goods with the Conveyor System. The efficient and time-saving material feed transports textiles, films and other roll materials directly to the laser machining process – for seamless and precise cutting results.
Ideal for sheet and board materials
Twin Table System
Increase your productivity with the Twin Table System. While cutting on one material carrier, you can reload the opposite side in parallel. The permanent vacuum stabilises the material and ensures clean cuts and precise results.
Shuttle Table System
Maximise the efficiency of your eurolaser machine with the Shuttle Table System. Load and unload the material carriers conveniently from three sides while the machine continues to work productively.
Remote Operation
Thanks to the software-controlled division of the working area, you can process your material on one side while the opposite side is already being reloaded – for a consistently efficient work process.
Conveyor System
Automate your machining process for roll goods. The automatic material feed enables flexible materials such as textiles to be fed directly from the roll to the laser processing machine with precision and then forwarded to a removal table. Thanks to the exact material feed, almost endlessly long cuts are possible, which connect seamlessly to one another.
The roll material is supplied by an automatic feeding unit, while an integrated edge control system ensures precise positioning for laser processing. Optionally, the Conveyor System can be expanded to include a winding unit that evenly rolls up the processed material. This creates a fully automated machining process that combines maximum efficiency and precision.
Container
for collecting material residues.
Automatic conveyor belt
cleaning of smoke residue and material remnants during feed.
Camera recognition systems
for precise contour cutting of printed materials.
Use of various marking modules
for printing, marking and labelling sewing marks, barcodes or labels.
Adjustable exhaust
for precise control of the suction power and savings in energy costs.
Guide rail system
system for parallel processing of multiple rolls.
Different mesh sizes
for perfect results with different material properties.
Additional positioning aids
for quick and precise insertion of roll material.
Mechanical edge trimming
for straightening and relaxing the fed material.
Winding Unit
The Winding Unit is an optional addition for the continuous winding of processed textiles. It enables you to achieve a fully automated process.
Table extension
The table extension allows material to be removed during the machining process. Accessibility from three sides increases your flexibility in the production process.
Conveyor belt
The durable stainless steel mesh belt transports the roll material to the laser cutting machine without tension. There is no fabric distortion and the contactless processing by the laser produces excellent results.
Feeding unit
The automatic edge control of the feeding unit guarantees the precise position of the material, so that metre after metre can be cut with consistent quality and accuracy.
Advantages of the Conveyor System
Increased productivity through automatic material handling and feeding.
Interruption-free process thanks to removal of the cut pieces during cutting.
Maximum precision thanks to distortion- and tension-free material feed.
Precise workpiece placement thanks to automatic edge control in the feeding unit.
Processing of very large formats thanks to seamless cutting continuation.
Smartfeed function for optimum feed rate to match your cutting data.
Optimal adjustment of speed for tension-free material feed.
Barcode-based residual length recording ensures that there is always sufficient material.
The Conveyor System is available for the following models:
1,330 x 1,230 mm (52.3" x 48.4")
1,800 x 1,230 mm (70.8" x 48.4")
1,800 x 3,200 mm (70.8" x 125.9")
2,270 x 1,600 mm (89.3" x 62.9")
2,270 x 3,200 mm (89.,3" x 125.9")
2,740 x 3,200 mm (107.8" x 125.9")
3,210 x 3,200 mm (126.3" x 125.9")
Twin Table System
The Twin Table System increases your profitability. While cutting is taking place on one material carrier, the other side can be reloaded. The continuous vacuum reliably stabilises your material and ensures precise results, ideal for thin, light or tension-sensitive materials such as films or veneers. Use the table modules individually or in combination, depending on your needs, flexibly tailored to your requirements.
-
Loading and unloading (A) during the cutting process (B) -
Permanent vacuum under the workpiece -
Free access to the material
Advantages of the Twin Table System
Permanent vacuum under the workpiece for optimum material positioning.
No slipping of the cut material during the shuttle process.
Material fixation always enables maximum precision, even across multiple process stages.
Easier access to the produced pieces thanks to movable material carriers.
High efficiency through minimisation of downtime thanks to the two table modules.
Fully automated process including table change and robot loading possible (24/7 operation).
Permanent extraction of cutting emissions.
Easy to use and clean.
The Twin Table System is available for the following models:
2,270 x 1,600 mm (89.3" x 62.9")
Shuttle Table System
The Shuttle Table System minimises downtime and increases the efficiency of your eurolaser cutting machine. While the machine is running, you can conveniently load and unload the material carriers from three sides. The table is changed after loading and unloading at the touch of a button and starts automatically as soon as cutting is complete. This reduces the monitoring effort and allows you to benefit from an optimised, time-saving workflow.
-
Easy replacement of the material carriers -
Free access to the material
Advantages of the Shuttle Table System
Loading and unloading during the cutting process for optimum machine utilisation.
Increased efficiency by minimising downtime.
The movable material carriers make it easier for you to access the produced pieces.
Fully automated process including table change and robot loading possible (24/7 operation).
New material is placed on the upper material carrier, preventing material residues from falling onto the new material.
Simple operation.
The Shuttle Table System is available for the following models:
1,330 x 830 mm (52.3" x 32.6")
1,330 x 1,230 mm (52.3" x 48.4")
1,330 x 1,630 mm (52.3" x 64.1")
1,800 x 1,230 mm (70.8" x 48.4")
2,270 x 1,230 mm (89.3" x 48.4")
2,270 x 1,600 mm (89.3" x 62.9")
Remote Operation
Increase your productivity. Thanks to the software-controlled splitting of the working area, you can process your material on one side of the machine while you are already reloading the opposite side. This optimises your processes and reduces downtime. Processing switches automatically between the two areas as desired, so that your laser machine is almost 100 per cent in use.
Advantages of Remote Operation
Loading and unloading the laser machine during the cutting process.
Increased efficiency by minimising process downtime.
Integrated safety concept for completely safe material removal and loading.
Different cutting jobs can be processed on each half of the table.
Remote Operation is available for the following models:
1,330 x 1,230 mm (52.3" x 48.4")
1,330 x 1,630 mm (52.3" x 64.1")
1,800 x 1,230 mm (70.8" x 48.4")
1,800 x 3,200 mm (70.8" x 125.9")
2,270 x 1,230 mm (89.3" x 48.4")
2,270 x 1,600 mm (89.3" x 62.9")
2,270 x 3,200 mm (89.,3" x 125.9")
2,740 x 3,200 mm (107.8" x 125.9")
3,210 x 3,200 mm (126.3" x 125.9")
Arrange a virtual machine demonstration
with live laser cutting
Registration
- No travel expenses
- Location-independent
- Connect team members
- Cutting results immediately visible
- Watch live how the laser works