---

Noticias y prensa

Discover automated solutions for the cutting of printed materials. From 19–22 May 2026, we present large-format laser systems combined with intelligent camera technology for contour-accurate cutting and maximum precision.

Experience live how printed textiles are cut fully automatically directly from the roll – enabled by our Conveyor System for continuous, efficient production.

Visit us in hall 3 | stand A140.

With Smartfeed, the feed in the Conveyor System is precisely aligned with the cutting data. The software ensures that all parts are completed in a single operation. If the system detects incompletely positioned contours, cutting only begins after optimal material transport.

This prevents interrupted cuts, increases process reliability and significantly improves material efficiency. Especially when processing roll material, Smartfeed enables a consistently precise and cost-efficient production process.

With RFID, eurolaser adds a key component to laser cutting for transparent production processes. Using the Label Module, individual parts can be uniquely identified and enriched with additional information directly during processing – contactless and without line of sight.

This enhances traceability, supports downstream process steps and warehouse management, and helps to systematically reduce sources of error. In this way, precise cutting becomes a consistently efficient workflow.

Micanite is widely used as an electrical and thermal insulation material – for example in electric mobility or in wind turbine generators. But how well can this technical synthetic mica be processed with a laser?

That’s exactly what we tested at eurolaser. Our material test shows how precisely micanite can be laser cut and what matters for achieving clean, high-quality results.

Discover automated solutions for processing technical textiles at our booth D81 in hall 8.0. From 21–24 April 2026, we present our CO₂ laser cutting system L-1200 with conveyor, including full-surface scanning, intelligent nesting and integrated marking solutions.

Visit us in Hall 8.0 | Stand D81

The material test on the eurolaser M-800 with Shuttle Table System demonstrates how efficiently EKA wood pulp board performs in laser processing. Material thicknesses from 1.0 to 8.0 mm were tested using the honeycomb table concept, which is excellently suitable for achieving clean results when processing cardboard and wood-based materials. The result: excellent cutting quality, precise contours and radius-free inner cut-outs across all tested material thicknesses.