Cutting Machine M-1600 for foils

- maximum productivity for maximum demands!

The cutting machine M-1600 for foils and membrane switches offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for cutting of plastic foils.

or please call for your individual consulting!

+49 (0)4131 / 9697 - 500

Technical specifications of Cutting Machine M-1600

Technical specifications of the Cutting Machine M-1600:

Working area (w x l):
Dimensions (w x l x h):

Max. material width:
Material clearance:
Laser power:
Laser source:
Speed:
Acceleration:

1,330 mm x 1,630 mm (52.3" x 64.2")
2,730 mm x 2,450 mm x 1,590 mm
(107.5" x 96.5" x 62.6")
1,575 mm (62")
15 - 50 mm (without material support)
60 to 600 watt
CO
1 - 1,414 mm/s (in steps of 1 mm)
max. 14.1 m/s² (555"/s²)

Which options do we offer you?

Foil machining with laser systems by eurolaser

The machining of technical foils and films always means a production engineering challenge. A high degree of material diversity with concurrently high demands for product precision, long life and diverse areas of application demand maximum flexibility from production methods. It is precisely in this environment that the advantages of eurolaser‘s modular system design and the universal application of laser technology become particularly significant.

Filigree cuts without damaging the material
Filigree details
Cut edges of multi-layer film in detail
Multi-layer cutting
Kiss cut and laser labeling for thin films
Kiss cutting
Table concept Honey-Comb for foil processing

In order to guarantee that your machine is ideally suited for your application, we concentrate during system design on the requirements that will arise from later use. For foil machining, laser systems are provided with a special table concept, the Honey-Comb. The beeswaxlike structure, from a thin aluminum foil, is very stable and allows a particularly good vacuum to form under the material. This very level tabletop is therefore used for materials with an unstable surface. Laser power, machining area and optional automation techniques are selected according to your needs.

Automated processes for your laser machine

Higher productivity, more economical working - save time and money

Shuttle Table System

This enables loading and unloading of the machining table during laser machining and demonstrably delivers an increase in efficiency of up to 75% when using a laser system.

more

Remote Operation

The software-controlled division of the work area allows laser system operation on alternate sides. This enables production to be continued on the opposite side while removing and reloading material.

more

Optional extras

Customized options simplify everyday tasks and increase your possibilities

POSITIONplus - Optical Recognition System

Automatic camera detection enables printed materials to be cut out precisely along the printed outline. Even copying tolerances in the printed format can be compensated by software control.

more

Mechanical Machining

Mechanical tool heads can be installed parallel to the laser, giving you the option to use tools such as milling cutters or knives. A valuable extension to your machining options with just one system technology.

more

Exhaust and filter units

Suction devices are selected to match your application and the table concept of your laser system. This guarantees complete emission extraction above and below the material.

more

Cooling units

The high-quality energy efficient cooling units are fitted with electronic temperature controllers and monitoring systems, so that they always control ideal conditions for laser beam sources, in order to guarantee constant performance.

more

Please call for your individual consulting!

 
© 2015 - 2017 eurolaser GmbH. All rights reserved.