Searchresult: 47 hits with "Material: Textilien"

Advantages of non-contact laser processing

Advantages of non-contact laser processing

Your material is cut and engraved without contact, so that there is no breakage, material distortion or crushing. Placement is extremely simple and there is no need to fix the workpieces. Benefit from More details...

Automated processing with unique application possibilities. NEW!

Automated processing with unique application possibilities. NEW!

Save time and automate your processing! 1. scan the QR or barcode 2. associated job file is opened 3. suitable parameters are retrieved 4. process starts fully automatically The new POSITIONplus prof More details...

Contour detection of already printed workpieces. NEW!

Contour detection of already printed workpieces. NEW!

With POSITIONplus professional you can scan printed workpieces or materials with existing contours and have the cutting data automatically created and positioned. In this way, you can cut with contour More details...

Over 90% time saving - POSITION PLUS PROFESSIONAL

Over 90% time saving - POSITION PLUS PROFESSIONAL

The area scan detects all fiducial marks and printed contours by scanning the entire work area once. The time for scanning fiducial marks is significantly reduced. The contour detection can signific More details...

Climbing skin for skis | Laser cutting

Climbing skin for skis | Laser cutting

Non-contact laser cutting is very well suited for cutting synthetic ski skins or climbing skins. Advantages of the laser when cutting ski skins: No fraying of the cut edge Sealing of the cut edge More details...

Neoprene | Laser cutting and engraving

Neoprene | Laser cutting and engraving

Many people are familiar with Neoprene from water sports clothing, the thermally insulating wetsuit. However, the material is actually called chloroprene rubber or polychloroprene and has many uses. I More details...

Guide Rail System | Automation and Options

Guide Rail System | Automation and Options

Processing of several textile rolls in parallel With our guide rail system for textile processing, several textile webs can be processed simultaneously on one laser system. Especially with narrow roll More details...

Marking Modules - Labeling, marking, printing - eurolaser

Marking Modules - Labeling, marking, printing - eurolaser

With the eurolaser marking modules, you can cut and mark your materials in a single operation. This makes it quick and easy to prepare further processing steps, such as the sewing process for textile More details...

Laser cutting test of technical fabrics by PONGS - eurolaser

Laser cutting test of technical fabrics by PONGS - eurolaser

eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...

Roll change on a 3XL-3200

Roll change on a 3XL-3200

Roll change on a 3XL-3200.

eurolaser Smartfeed - Optimum material feed for single work step cutting

eurolaser Smartfeed - Optimum material feed for single work step cutting

The feed cycle is controlled by the software in such a way that cutting of the individual parts is always carried out in a single work step. The software recognizes if some of the individual parts d More details...

Edge Trimming Tool for material relaxation

Edge Trimming Tool for material relaxation

If textiles are strongly woven at the edge, this can hinder precise laser cutting. The material undulates on the processing surface, which can lead to warpage. An edge trim can help here. Since the la More details...

Laser cutting of Mimaki printed fabrics - sublimation ink in laser test

Laser cutting of Mimaki printed fabrics - sublimation ink in laser test

When producing printed textiles, it is important to have contour-accurate cuts without affecting the print. In cooperation with Mimaki Germany, we tested textile prints for processing with our laser s More details...

Laser cutting of INVENTEX® protective textiles - PPE textiles in laser test

Laser cutting of INVENTEX® protective textiles - PPE textiles in laser test

INVENTEX® Spezialtextilwerk Funke specializes in the production of protective textiles. INVENTEX® materials are used, for example, by the fire department and police, in extreme sports, but also as w More details...

POSITIONplus - Optical recognition system for cutting printed materials

POSITIONplus - Optical recognition system for cutting printed materials

Precise and accurate cutting along contours is an absolute must for many applications. Fiducial marks can be used as corresponding markings. eurolaser offers a smart solution here consisting of a came More details...

Laser cutting systems for viscose

Laser cutting systems for viscose

Our laser systems are ideal for cutting viscose and other textiles. Contact-free laser processing is especially useful for delicate details. Our laser test showed that the fabric can be processed with More details...

Laser cutting in the soft signage industry

Laser cutting in the soft signage industry

Our laser systems are ideal for cutting and processing large format textiles in the soft signage industry. Contact-free laser cutting not only works absolutely precise for filigree and edge-free detai More details...

Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test

Laser cutting of polyester fabrics by bergertextiles - Technical textiles in laser test

eurolaser has tested different polyester-based fabrics by bergertextiles for their laser cuttability with the result: excellently suitable for laser cutting! We have tested the different polyester  More details...

Tenowo filter materials in laser test -  Zetafelt & Zetajet

Tenowo filter materials in laser test - Zetafelt & Zetajet

eurolaser has laser tested the nonwoven filter materials from Tenowo with the result: excellently suitable for laser cutting! Tenowo GmbH is one of the world's leading manufacturers of nonwovens. The More details...

JobIDENT - eurolaser software for automation of the machining process

JobIDENT - eurolaser software for automation of the machining process

LaserScout JOBIDENT enables the assignment of different application jobs by the reading out of the existing QR code. The job file identified is uploaded in the user interface automatically and the pro More details...

Seat cushion made of spacer fabrics | Laser cutting

Seat cushion made of spacer fabrics | Laser cutting

Cutting spacer fabrics without crushing The special feature of spacer fabrics is the material thickness, the third dimension of this textile. Spacer threads keep two textile surfaces at a distance fr More details...

Virtual Customer Visit - eurolaser demo

Virtual Customer Visit - eurolaser demo

NEW: VIRTUAL DEMOS You want to further advance your business? For everyone interested in the possibilities of laser application, we offer free virtual demos and sampling. We tailor every virtual custo More details...

Laser cutting of filtering facepiece respirator

Laser cutting of filtering facepiece respirator

A typical area of application for laser cutting is the cutting of textiles, for example for filtering facepiece respirators. These enclose the mouth and nose. In our video you can see the exact and fu More details...

Laser cutting of fiberflass babrics

Laser cutting of fiberflass babrics

Large format laser systems are optimally suitable for the cutting of textiles made of fiberglass. Especially the contactless processing through the laser beam and the therewith related non-deforming l More details...

Laser cutting of Cordura -fabric - Delinova150 by Delcotex

Laser cutting of Cordura -fabric - Delinova150 by Delcotex

Cordura® is based on a woven polyamide fiber and has special properties. It has a very high stability and tear resistance and even has a stab and bullet resistant effect. Delcotex uses the Cordura®  More details...

Laser cutting of home textiles | eurolaser

Laser cutting of home textiles | eurolaser

eurolaser constructs especially configured laser systems for textiles, fabrics, knitted fabrics, fleece, felts and much more. Due to precision, high processing speed and a consistent cutting quality, More details...

Printed textiles | laser cutting

Printed textiles | laser cutting

Perfect cut with laser and optimized preparation for further processing It is a well-known fact that the systems from eurolaser have a clear advantage – especially where processing from the bale is c More details...

Protective vests made of aramid fabric | Laser cutting

Protective vests made of aramid fabric | Laser cutting

Laser cutting of technical textiles Bullet-resistant vests are also known as bullet-proof vests in everyday language. Their task: Distribution of the kinetic energy on the impact of bullets, to preve More details...

Machining of textiles and fabrics | Laser cutting

Machining of textiles and fabrics | Laser cutting

eurolaser offers CO2 laser cutter especially for textiles Large format laser systems are ideally suitable for cutting of textiles. Today, modern fabrics, spacer fabrics, fleece and needle felt, as we More details...

Large-sized flags | Laser cutting

Large-sized flags | Laser cutting

eurolaser customer report: Fahnen Gärtner  Austria's largest flag manufacturer Fahnen-Gärtner GmbH was founded in Mittersil in Austria in the year 1945. Continuous investments in line with the m More details...

Ink Marker - Contact-free marking | Automation and Options

Ink Marker - Contact-free marking | Automation and Options

Contact-free ink-jet marking The demand for simple, economical and contact-free marking methods is growing continuously, particularly for sewing markings (clippings) in the textile manufacturing bran More details...

Ventilation ducts made of technical textiles | Laser cutting and marking

Ventilation ducts made of technical textiles | Laser cutting and marking

Stress-free perforating, cutting and marking Ducts for the distribution of air are normally made of sheet metal. The use of ducts made of technical textiles is now becoming more common in modern air  More details...

Parachute silk made of polyamide | Laser cutting

Parachute silk made of polyamide | Laser cutting

Cut with laser precision Light, virtually airtight and colourful – typical properties of parachute silk. Nowadays these synthetic tissues which are made of polyamide fibres as well as Aramide and Dyn More details...

Foam materials | Laser cutting and engraving

Foam materials | Laser cutting and engraving

Foams in the industry The industrial usage of foams has developed a lot in the last few years. Today’s foam market consists of a multitude of different materials for a wide range of applications. For More details...

Ink Printer Module and Label Module | Automation and Options

Ink Printer Module and Label Module | Automation and Options

Laser cutting - labelling - printing Three machining processes in a single operation. Expand the usage areas of the laser system by combining the eurolaser Label and Ink Printer Module options. Labe More details...

Filter material | Laser cutting and marking

Filter material | Laser cutting and marking

Because only the best gets through Woven fabrics for filtration are frequently manufactured for technical processes and are often in continuous operation. Whether for the separation of contaminants o More details...

Self-adhesive textile | Laser cutting

Self-adhesive textile | Laser cutting

Exactly printed, cut and always perfectly positioned Promotional media made of textiles have many benefits. They are light, can be printed in brilliant colours and backlit, are flexible in use and su More details...

Polyester fabrics of G.O.F. | Laser cutting test

Polyester fabrics of G.O.F. | Laser cutting test

Textile Production - Printing - Finishing eurolaser is constantly looking for possibilities to further develop the laser systems in a customer-oriented way.  It should come as no surprise that t More details...

ETTLIN lux® - Light technical fabric | Laser cutting test

ETTLIN lux® - Light technical fabric | Laser cutting test

The perfect symbiosis of functionality and design ETTLIN lux ® effect fabrics can be cut with standard scissors and knives. Ultrasonic welding and sewing are also commonly used processing methods. In More details...

Filter fleece of polyester | Laser cutting

Filter fleece of polyester | Laser cutting

Modern filter technology through modern manufacture One of the uses of filter fleece is the separation of solids from liquids in wet filtration. Good filter technology is critical to the outcome of b More details...

Printed polyester fabrics | Laser cutting

Printed polyester fabrics | Laser cutting

Textile Production - Printing - Finishing The optical recognition system allows the exact cut along the pressure contours. The CCD camera is installed directly in the processing head and plots the ma More details...

Heat-resistant glass fibres | Laser cutting

Heat-resistant glass fibres | Laser cutting

Application: Motor sports and tuning In our example, we tested both glass-fibre fabric and approx. 8 mm thick glass-fibre fleece in our CO2 laser systems. The cut contour corresponds to a typical for More details...

Velcro material | Laser cutting

Velcro material | Laser cutting

Exact cutting of polyester with CO2 laser Velcro is the ideal alternative when it comes to fixing something quickly and then opening it again. The last few years have seen this material being used in More details...

Teddy bear made of polyester fabric | Laser cutting

Teddy bear made of polyester fabric | Laser cutting

Cutting of plush fabric with no fraying The laser beam with its focussed light is the ideal processing method in this case. Contactless processing and the fused cutting edges resulting from the conce More details...

Personalised leather organisers | Laser marking

Personalised leather organisers | Laser marking

Customised engraving in leather The smoother the leather, the more precise and filigree the laser engraving. The relief effects that can be achieved using different laser power via grey scales can be More details...

Fleece finishing | Laser engraving

Fleece finishing | Laser engraving

Haptics thanks to laser embossing This technology is particularly advantageous for discreet lettering as the logos, images, letters etc. appear tone-in-tone on the engraved material. That is why colo More details...

Fully-automatic production line | Laser cutting

Fully-automatic production line | Laser cutting

Fully-automatic processing of technical textiles This video shows the fully-automatic processing of technical textiles for the automotive branch. The laser system is fully integrated in the productio More details...

Cookie settings

Settings for your privacy

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.