What are the benefits of the unloading table of the conveyor system?
- Time-saving thanks to the unloading of workpieces without any interruption in the work process
- Easier access to the cut materials
- Process optimization due to timely adjustment of the material feed to the work rhythm of the operator
- Individually adjustable table height feature for ergonomic unloading (optional)
- Feed cycle adjusted to the cutting data and software-controlled optimization
- Virtually seamless cutting of large formats
Unloading of material without any interruption in the production process
Once the laser cutting process is completed the material is transported to the unloading table by conveyor belt. There the operator can unload the parts while the laser process continues without any standstill times.
Optimum access to the individual cut pieces
The table extension enables simple removal of the individual pre-produced parts from the laser system by the operator. In particular with wide work surfaces, access from three sides means the ready cut materials can be reached with ease.
Process optimization thanks to time-adjusted material feed
The material feed is interrupted by the release button on the unloading table until the operator has completed unloading. This function is particularly expedient for all processes in which collecting up of the ready cut material takes longer than the actual cutting process or when several systems are being operated by one person at the same time. The work rhythm of each individual system is not necessarily taken into account in the overall workflow. This option, however, allows the operator to adjust the cutting process of the laser system so that it matches his own rhythm.
Ergonomically adjustable table height
The optionally available individual height adjustment feature of the table can make further processing easier for employees. It also enables transport of the materials to a table with a different height, e.g. for packing or sewing.
Smartfeed for an optimum material feed that matches the cutting data
The feed cycle is controlled by the software in such a way that cutting of the individual parts is always carried out in a single work step. The software recognizes if some of the individual parts do not fit onto the processing table due to the arrangement of the cutting contours. Thanks to the intelligent feed optimization, the individual part is not cut until it has been completely moved onto the processing surface. This prevents any continuation of cuts.