Laser Machine XL-3200 for wood

- simply ginormous!

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size wooden plates. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

or please call for your individual consulting!


+1 514 622 3303

+49 4131 9697 500

Technical specifications of the CO₂ laser machine XL-3200:

Working area (w x l):
Dimensions (w x l x h):

Max. material width:
Material clearance:
Laser power:
Laser source:
Speed:
Acceleration:

2,270 mm x 3,200 mm (89.3" x 125,9")
3,990 mm x 3,940 mm x 1,600 mm
(157.0" x 155.1" x 62.9")
2,350 mm (92.5")
58 - 80 mm (according to material support)
60 to 650 watt
CO2 
1 - 1,414 mm/s (in steps of 1 mm)
max. 9.1 m/s² (358"/s²)

Which options do we offer you?

Woodworking with laser machines by eurolaser

The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser machine individually for you.

 

Special table concepts are needed for ideal wood machining. Thin wooden materials, such as veneers, MDF and plywood < 10 mm thick are cut on an aluminum frame similar to Honey-Comb. For cutting stamped outlines or solid timber > 10 mm in thickness, it is preferable to use the PIN concept. This comprises stable brass or PMMA locating pins and provides for perfect machining with increased smoke emissions.

We select laser power, machining surface and optional automation systems to suit your requirements. To do this, we refer to our test results with your material and our experience from more than 10,000 application samples.

Automated processes for your laser machine

Higher productivity, more economical working - save time and money

Alternate operation allows you to make more use of the laser system.

Remote Operation

The software-controlled division of the work area allows laser system operation on alternate sides. This enables production to be continued on the opposite side while removing and reloading material.

more

Optional extras

Customized options simplify everyday tasks and increase your possibilities

The optical recognition system guarantees precise cutting of printed materials

POSITIONplus - Optical Recognition System

Automatic camera detection enables printed materials to be cut out precisely along the printed outline. Even copying tolerances in the printed format can be compensated by software control.

more

Many options on a single system are open to you - they are almost infinite

3 in 1 - Mechanical Machining

Mechanical tool heads can be installed parallel to the laser, giving you the option to use tools such as milling cutters or knives. A valuable extension to your machining options with just one system technology.

more

Engrave razor-sharp images

PICTUREplus - Raster Engraving Unit

This optional equipment allows machining of image files and production of both 2D-images and 3D-reliefs. Engraving is possible with a resolution of up to 1200 dpi and in 256 shades of grey.

more

Exhaust and filter units

Exhaust and filter units

Suction devices are selected to match your application and the table concept of your laser system. This guarantees complete emission extraction above and below the material.

more

Cooling units for your laser machine.

Cooling units

The high-quality energy efficient cooling units are fitted with electronic temperature controllers and monitoring systems, so that they always control ideal conditions for laser beam sources, in order to guarantee constant performance.

more

Please call for your individual consulting!

 
© 1994 -2024 eurolaser GmbH. All rights reserved.