Laser cutting and engraving of wood

eurolaser offers CO₂ laser cutter especially developed for wood panels

eurolaser systems are ideal for the cutting and engraving of wood. Especially with filigree details, the contactless laser processing is characterized. The unique combination of CO2 laser cutter and router on one single machine offers you an unprecedented flexibility in the processing of wood panels.

What are the advantages of laser cutting of wood?

Laser engraving of images and reliefs with high resolution
Laser engraving of images and reliefs with high resolution
Exact cutting of inlays made of veneer
Exact cutting of inlays made of veneer
Filigree cutting without any material damage
Filigree cutting without any material damage
  • No chips – thus, no clearance of the machine area necessary
  • Cutting of extremely fine, virtually radius-free contours
  • No need to clamp and fix of panels
  • Less breakage and waste through contactless laser cutting
  • Burr-free cut edges – no post-processing necessary
  • No tool wear and thus - constant high cutting quality

What added value have eurolaser cutter?

  • Combined processing with router and CO2 laser possible on one machine
  • Unique variety of table sizes – suitable for all standard panel formats
  • Automation functions for optimal utilization of cutting systems
  • Special table construction for optimal processing
  • Excellent exhausting of emerging gases– Filtration possible
  • Camera recognition for laser cutting of printed wood panels
  • Large format engravings (also reliefs) over the entire processing area
Dry, resin-free and homogenous panels are suitable for the laser cutting of wood.

Material information for laser cutting of wood:

Wood is used in diverse industries and is, due to its versatility, a very popular material. More and more, efficient CO2 laser technology is being used. The more homogeneous the wooden structures are, the more suitable is the material for laser cutting and engraving. Due to the thermal laser process, also features, such as moisture content, density, oil and resin content are influential variables for the quality and speed of the laser cut. When processing wood materials, there will occur a mild to strong oxidizing cut edge during laser processing. This means that a darkening cannot be avoided. Often these are heavily depending on the choice of wood and the water and resin content.
The basic rule is: The drier and resin-free the material is, the lighter will be the cut edge.

Well-known type of wood and similar material description:

Solid wood, natural wood, coniferous wood, hardwood, bamboo, balsa wood, mahogany, basswood, beech, poplar, birch, maple, Douglas fir, spruce, pine, fir, common beech, oak, ash, cherry, walnut, obeche, padouk, teak, veneer, plywood, laminated wood, MDF, multiplex


On eurolaser.tv you can watch videos about laser cutting, engraving, markingVideos of cutting and engraving of wood can be found on eurolaser.tv

 

Well-known type of wood and similar material description:

Solid wood, natural wood, coniferous wood, hardwood, bamboo, balsa wood, mahogany, basswood, beech, poplar, birch, maple, Douglas fir, spruce, pine, fir, common beech, oak, ash, cherry, walnut, obeche, padouk, teak, veneer, plywood, laminated wood, MDF, multiplex


On eurolaser.tv you can watch videos about laser cutting, engraving, markingVideos of cutting and engraving of wood can be found on eurolaser.tv

 

We will gladly advise you about cutting and engraving of wood to our laser systems and special options for wood processing.

or please call for your individual consulting!

+49 (0)4131 / 9697 - 500

 
© 2015 - 2017 eurolaser GmbH. All rights reserved.