Properties of RENOLIT GORCELL:
- Low weight
- Thermally formable
- Environmentally friendly, 100% recyclable
- Very good stability and compressive strength
- Chemically resistant
- Great versatility in application
- Water and weather resistant
The goal of the laser test
Clean, burr-free cuts without damage to the material surface
We tested a selection of different RENOLIT GORCELL variants from Renolit for processing with our laser cutters. In consultation with Renolit, the following requirements of the processors were taken into account:
- Precise, burr-free cut without deformations or dents
- Exact corners without visible over-cut or marks on the edges
- Damage-free material surfaces without any residue
- No residual particles or chips on the machine after cutting
Test result:
Up to 15 mm thickness honeycomb sheets can be cut with excellent results
We have extensively tested the six variants of RENOLIT GORCELL and were able to establish perfect cutting quality for four materials. For the remaining two materials, a easily removable film of smoke settles on the underside of the material from a thickness of 15 mm, which would have to be removed in a further work step. Apart from this, the cut edges all exhibit excellent quality. Vacuum formation on our Honeycomb table concept ensures good material fixation without additional efforts for the operator. Overcuts in the corners, breakage and waste are completely avoided. Overall, we have achieved consistently high cutting quality without tool wear.
Additional benefits of cutting plastic honeycomb sheets with eurolaser systems:
- Optional: Efficiency increse with Remote Operation or Shuttle Table Systems
- Optional: Label Module
- Optional: Tool variants from Zünd can be used on the same machine
RENOLIT GORCELL WS A (20 mm)
Suitability for laser cutting: well suitable
RENOLIT GORCELL HI (10 mm)
Suitability for laser cutting: excellently suitable
RENOLIT GORCELL PP-F (5 mm)
Suitability for laser cutting: excellently suitable
RENOLIT GORCELL PP-F (10 mm)
Suitability for laser cutting: excellently suitable
RENOLIT GORCELL WS A (15 mm)
Suitability for laser cutting: well suitable
RENOLIT GORCELL WS A (10 mm)
Suitability for laser cutting: excellently suitable
Do you have any questions? We are pleased to advise you.